Most kitchen managers we talk to use both words for the same thing. So what's the real difference in a grease trap vs grease interceptor? And which one does your business need? Both catch fats, oils, and grease (FOG) before it hits the sewer. But they come in very different sizes, they sit in different spots, and they don't get serviced on the same schedule.
We service both for restaurants, casinos, hotels, schools, and other commercial kitchens across Southern Nevada. Below, we cover how they compare, which one most local kitchens need, and how to tell what you've got.
Key Takeaways
- A grease trap is a small unit inside the kitchen. A grease interceptor is a large tank, usually outside and below ground.
- Nevada food rules prefer an interceptor. A small trap is only allowed when an interceptor won't work at the location.
- Small traps need cleaning more often. Interceptors get pumped by a vacuum truck on a set schedule.
- Your sewer authority sets the maintenance rules, and the building department approves any new or replaced unit.
Grease Trap vs Grease Interceptor: The Basic Difference
Both devices work the same way. Wastewater flows into a tank and slows down. Grease floats up, food solids sink, and then the cleaner water in the middle moves on to the sewer. So what really separates them? Scale.
A grease trap (you'll also hear "hydromechanical unit") is small. Most sit under or near a sink. A grease interceptor, on the other hand, is a much bigger tank. It usually sits outside the building, below grade, and it takes the flow from the whole kitchen.
People swap the two words all the time, and that's fine over coffee. With an inspector, a plumber, or a permit, though, it's a different story. There, the two words mean two different pieces of equipment.
Side-by-Side Comparison
| Grease Trap | Grease Interceptor | |
|---|---|---|
| Location | Inside, under or near a sink | Outside the building, usually in the ground |
| Size | Small | Large |
| Serves | One or a few fixtures | The whole kitchen |
| Typical user | Small sites where an interceptor won't work | Restaurants, casinos, hotels, schools, grocery stores |
| Service | Frequent cleaning | Vacuum truck pumping on a set schedule |
Which One Do Southern Nevada Kitchens Need?
Usually, an interceptor. Nevada's state food rules name the interceptor as the preferred choice. A small trap is only allowed when an interceptor won't work at the location. The Southern Nevada amendments to the plumbing code go a step further: interceptors go outside the building, and each one serves just one business.
Then there's the question of who's in charge. It's not one agency. Your sewer authority sets the grease rules for your address. In the valley, that's the Clark County Water Reclamation District, or the City of Las Vegas, Henderson, or North Las Vegas. The Southern Nevada Health District permits and inspects food businesses. And your local building department handles permits for new or replaced units. Want the full breakdown? See our grease trap guide.
How Maintenance Differs
Grease Traps
Small tank, fast fill. That's why a busy kitchen may need its trap cleaned often. Skip one cleaning and grease can slip past the trap into your drain lines. As a result, slow drains, odors, and backups start to show up.
Grease Interceptors
An interceptor holds a lot more, so it can go longer between visits. It still needs regular pumping by a licensed hauler with a vacuum truck, though. Most local rules lean on the 25% rule. For example, the City of Las Vegas maintenance agreement says to pump before grease and solids reach 25% of the tank's working capacity.
One thing stays the same with either device. Keep your service records on site. Our grease trap service includes a record after every visit, so you have proof ready when an inspector asks.
How to Tell Which One You Have
Take a quick walk around. Is there a small metal or plastic box under a sink, with a lid you can lift by hand? That's likely a grease trap. Heavy manhole-style lids in the parking lot or behind the building are another story. Those point to an interceptor.
Still not sure? Check your building plans or old service records. Or just call us. Our crew can identify the unit, check its condition, and suggest a service plan that fits your kitchen.
Need Grease Trap or Interceptor Service in Southern Nevada?
Small trap or big interceptor, our team can pump it, check it, and keep you ready for inspections.
When to Switch From a Trap to an Interceptor
Sometimes a small trap just can't keep up. Watch for these signs:
- You're cleaning the trap so often that it disrupts your kitchen.
- Backups or odors keep coming back, even right after service.
- Your menu or volume has grown since the trap went in.
- You're remodeling, changing tenants, or failing inspections.
A switch is a plumbing project, so it starts with your plumber or engineer. They size and design the new unit. After that, the building department and your sewer authority sign off. Curious what goes into sizing? Read our post on grease trap sizing for restaurants.
To be clear, we don't design or engineer interceptors. What we can do is tell you what we see on service visits, and how a bigger unit would change your pumping schedule. We also handle grease trap repair and replacement when a unit is worn out or damaged.
Why Nevada Businesses Call Silver City Processing
We've served Southern Nevada since 1995. Our crews are licensed, insured, and SNHD permitted. On top of that, you get same-day scheduling, upfront pricing with no hidden fees, and 24/7 emergency response. A single restaurant or a large hotel or casino kitchen? Either way, we fit the service to your site.
Still weighing a grease trap vs grease interceptor? Or do you just need a pump-out? Call us at (702) 642-9318 or request service online today.